hamos RSS elastomer separators
With the hamos RSS
elastomer separator, undesired elastomers are separated out in a dry
way. A highly concentrated elastomer fraction and a high quality
practically elastomer-free plastic fraction are obtained.
In recycling of plastics from electronic waste, automotive light shredder fractions (SLF), etc. it is important to obtain clean and directly recoverable plastic fractions. Elastomers contained in plastics, such as for example silicone rubber or rubber of different composition, can cause severe disturbance however. They are largely thermosetting materials and therefore no longer melt, this leading to loss of quality and deficiencies in processing of the plastics.
then the hamos RSS is the ideal solution for elastomer removal.
In order to obtain an optimum separation result with the hamos RSS, the plastic mixtures to be separated must have the following characteristics:
You are not certain whether your material is suitable for separation with the hamos RSS? Speak with our experts. We will be pleased to investigate the separation capability of your material in our technical department.
We will show you which purities and throughput rates we can achieve with your material. Based on the test results, you receive out test report and a suitable offer for your application.
The polymer fraction with elastomer contamination is fed into the integrated hopper of the hamos RSS. The elastomer separator takes out the residual rubber/elastomer contamination. The result is a practically elastomer-free, clean plastic granulate.